MON-FRI9AM - 5PMCALL US+61 0476 398 266
CARPET CLEANING
THE SIX STEP DRYTRON CARPET CLEANING PROCESS
OUR CLEANING PROCESS AND PRODUCTS ENSURE AN EFFECTIVE CLEAN.
Drytron has built a successful Melbourne carpet, rug, curtain and upholstery cleaning company through 30 years of best practice learning, refinement and training. In that time we have developed two proprietary products, Drychem One and Drychem Two.
These products, along with a small amount of moisture are used for effective, deep down extraction of most water and oil borne soil and stains. The Drytron cleaning process also raises the carpet fibres into a vertical position, allowing the compounds to quickly go to work and loosen soil.
Our Drychem Solutions are broad-spectrum cleaning compounds. This means that they are extremely effective in terms of the number of different kinds of soil and stains they can remove.
Although Drytron began as a Carpet Dry Cleaning Business, we have developed and grown over time becoming specialist in Upholstery, Leather, Mattress and Rug cleaning. That means we clean and sanitise couches, dining chairs, car seats and even tractor ceilings.
Further, we are now also trained and certified in Tile and Grout Cleaning, Lino Stripping/Cleaning and Sealing, Slate Cleaning and Sealing and much more.
One of our most frequent and important jobs we are called for is Flood and Water Restoration and Structural drying. If your house or business is flooded by way of rain, a burst pipe or a sewage problem, do not hesitate to call us as we are also highly trained, certified and insured in this recovery work.
- STEP 1 – VACUUM
- STEP 2 – STAIN BREAKDOWN
- STEP 3 – APPLY DRYCHEM ONE
- STEP 4 – APPLY DRYCHEM TWO
- STEP 5 – TURBO AGITATION
- STEP 6 – HAND GROOM CARPET PILE
STEP 1 – VACUUM
The first step is to use a high powered vacuum with a power head and beater bar. This removes abrasive loose elements and moves the carpet fibres into a vertical position. This assists the compounds to quickly go to work and loosen soil from the whole fibre.
STEP 2 – STAIN BREAKDOWN
Our Drychem Solutions are broad-spectrum cleaning compounds. This means that they are extremely effective in terms of the number of different kinds of soil and stains they can remove.
STEP 3 – APPLY DRYCHEM ONE
Drychem One is applied using a compressed air sprayer. This transfers a light mist to the carpet, eliminating the danger of over wetting the carpeting or backing.
STEP 4 – APPLY DRYCHEM TWO
The accumulator pad is submerged in hot water along with Drychem Two then squeezed as dry as possible to further minimise the amount of moisture applied to the carpet before being applied to the turbo agitator.
STEP 5 – TURBO AGITATION
The rapid rotation of the accumulator pad activates the Drychem compounds, which draws the soil from the fibres on to the pad. This process is gentle enough to maintain the integrity of the carpet pile.
STEP 6 – HAND GROOM CARPET PILE
Lastly we hand groom the carpet pile (Where applicable). Walk on immediately, and dry within an hour!
Ready to get started?